Feed on
Posts
Comments

Monthly Archive for September, 2009

自己DIY過兩代路達桌, 發現路達桌插板惱人問題就是中央會變形凹陷, 可經由針對自己的路達機量身製作插板來解決. 本文與各位分享我的路達桌改造過程. 雖然本文以Jepson下壓路達機為例, 但應也可適用您的路達機. 請點選這裡閱讀全文, 下載抓回去列印. My DIY router table has evolved thru 2 generations, and I found the problem that troubles the most is the cave-in phenomena happened around the center of the insert, which can be solved by customizing the insert specifically for your router. This article shares with you my two […]

Read Full Post »

當您的桌上型圓鋸機開機從斷斷續續, 變成開不了機, 別擔心, 多半是開關白金接點積碳. 這是此類機器極常見的現象. 本例中以力山桌上型圓鋸機為例, 教您如何清理開關, 您的機器又可以是生龍活虎了! 點選這裡閱讀全文, 下載並抓回去列印. When your bench-top table saw start to show the symptom of failing to start occasionally, then turns into a completely halt, do not worry. It’s most likely the platinum contact problem in the switch assembly, a very common problem among these benchtop models. In this […]

Read Full Post »