〈改造路達桌 – Customize Your Router Table Insert〉的留言

留言者: 木老老

木老老 — Wed, 21 Apr 2010 06:35:31 +0000

回覆的對象為「小席」。可以. 但一般用依板就夠, 比較穩一些.

留言者: 小席

小席 — Wed, 21 Apr 2010 01:06:43 +0000

路達桌的軌道跟角鋁也可以像圓鋸桌一樣改嗎? 還是有什麼不同?

留言者: 木老老

木老老 — Sat, 17 Apr 2010 04:19:06 +0000

回覆的對象為「Isiah Rabine」。 Dont be scared by these DIY jobs, sometimes they are simpler than they seem. Besides, like u said, it saves a lot of money hiring a worker. Most of all, it's really fun.

留言者: Isiah Rabine

Isiah Rabine — Fri, 16 Apr 2010 10:48:51 +0000

This advice has really helped myself, I am terrible with anything related to hands-on jobs however really don’t have enough cash to the workers.

留言者: 木老老

木老老 — Sun, 11 Apr 2010 03:57:14 +0000

回覆的對象為「小麻」。能縮到最小當然最好. 但也要顧及能夠撐起桌面. 不用磁鐵吸住板子的原因是, 我常用到raised panel cutter, 很大一支斜切的廚櫃銑刀. 用起來振動力非常大. 用吸鐵吸的板子不牢靠, 會跳動, 很危險.

留言者: 小麻

小麻 — Sat, 10 Apr 2010 06:38:04 +0000

力學上您縮小底板, 減少下沉和共振, 那支撐桌板的腳柱間距有無需要也縮小?
另外您為何不沿用尿素板的用磁鐵快速拆拔?

留言者: 木老老

木老老 — Fri, 15 Jan 2010 12:26:34 +0000

回覆的對象為「小陳」。因為Dado blades裝好會有厚度, 所以必須將鋸片框的紅色檔板拆掉. 拆掉的話要自製夾板木鋸台面, 否則紅色檔板拿掉後留下的空窗太大. 鋸片內孔匹配完全不會有問題. 唯一限制是鎖Dado 鋸片的總厚度不要超過1/2英吋. 一般買的dado set都會從1/8英吋薄的dado 開始搭配, 所以規格不用擔心, 買下去ok. 結論是: 安心買下去, 但要拆鋸台的紅色檔板, 要自製夾板(或木心板)桌面.

留言者: 小陳

小陳 — Fri, 15 Jan 2010 07:20:08 +0000

回覆的對象為「木老老」。國外買Dado blades 放在台灣桌上型圓鋸機台上(我的也是力山), 使用或匹配會有問題嗎? 我想向amazon 買, 要注意甚麼規格嗎?

留言者: 木老老

木老老 — Sat, 09 Jan 2010 13:36:10 +0000

回覆的對象為「Mike Thomas」。

Hi Richard,

I am so glad that my article could be of help. I figured my blog is mostly in Chinese and it may not be convenient for u to read, so I put a Google translator on the side bar(upper right corner) in case u need any assistance. The Google translation may not be accurate but it beats nothing 🙂

Anyway if the Google translation puzzles you, I am always here to help.

Happy DIYing!

留言者: Mike Thomas

Mike Thomas — Sat, 09 Jan 2010 06:09:35 +0000

Hey.I just wanted to take a minute to tell you that I liked this blog post. I just stumbled across it through Google, and will be checking out the rest of your blog. Richard Owner of Router Table Plans